Save 10%
Rain Spoon Assembly for Vantage Vue ISS Weather Station (0.2 mm) - SKU 7345.319
Replacement rain spoon assembly, 0.2 mm, for the Vantage Vue integrated sensor suite weather station.
Save 10%
Replacement rain spoon assembly, 0.2 mm, for the Vantage Vue integrated sensor suite weather station.
Save 10%
Replacement reed switch cover for rain collector tipping bucket in all wireless and cabled Vantage Pro2, original Vantage Pro, Weather Wizard II, ...
View full details
Save 10%
Replacement reed switch for rain collector tipping bucket in all wireless and cabled Vantage Pro2, Vantage Pro, Weather Wizard II, and Weather Mon...
View full details
Save 10%
Use removable Chafe Guards on braided or twisted line to protect against wear. They’re easy to remove and adjust as lines stretch or chafe protect...
View full details
Save 10%
Chafe protection is critical at the dock, at anchor, or on a mooring. The Chafe Guard is a good solution to prevent chafing over a cleat, cap rail...
View full details
Save 10%
Replacement or add-on bird-proof spike for WindTrak 15 vanes. Extends another 10 inches (25cm) above the vane to discourage birds from landing.
Save 10%
Replacement reed switch for rain collector tipping spoon in all wireless and cabled Vantage Pro2 sensor suites. 19” (0,5 m) sensor cable.
Save 10%
Replacement reed switch for rain collector tipping spoon in all stand-alone rain collectors. 40’ (12 m) sensor cable.
Save 10%
Replacement retainer clip for back shelter housing on cabled and wireless Vantage Pro2 integrated sensor suites.
Save 10%
Replacement retainer for antenna grommet in back shelter housing.
Save 10%
Connect sensors with RJ connectors to your EnviroMonitor Node with this adapter. Not compatible with the AeroCone Rain Collector (#6463, #6465).
Save 10%
Rocker Stoppers help dampen the rocking motion of boats at anchor. Simply tie Rocker Stoppers approximately 44 cm (18″) apart, making a string of ...
View full details
Save 10%
When it's time to lower your sail you can rely on Davis' Round and Flat Sail Track Stops to hold your sail and its slides in place on the mast and...
View full details
Save 10%
Replacement rubber feet for kickstand on Vantage Pro2 and original Vantage Pro consoles. Use two per console.
Save 10%
Awareness of the rudder angle is an important safety factor. This is especially true while moving in and out of your berth, drawing alongside anot...
View full details
Save 10%
The SensorLink Adapter Kit allows your EnviroMonitor Gateway (or any cabled receiver) to receive transmissions from a Davis transmitter, such as a...
View full details
Save 10%
The Drill & Drop probe is fully encapsulated and can be completely buried, reducing the risk of machinery damage. Measures soil moisture and t...
View full details
Save 10%
The Drill & Drop probe is fully encapsulated and can be completely buried, reducing the risk of machinery damage. Measures soil moisture and t...
View full details
Save 10%
The Drill & Drop probe is fully encapsulated and can be completely buried, reducing the risk of machinery damage. Measures soil moisture and t...
View full details
Save 10%
Replacement case for storing your sextant. Includes Foam Set for Sextant Case.
Save 10%
Change the solar panel’s angle from 5° to 30°. Increase solar panel’s efficiency at lower latitudes. Includes mounting hardware. For use with Vant...
View full details
Save 10%
Minimizes stress on ALL lines—or use on any boat! Shockles are most commonly found around boats. They are often used as shock absorbers on dock li...
View full details
Save 10%
Progressive tension design means the further LineSnubber stretches, the greater its return force. The result is smooth action and moderated stress...
View full details
Save 10%
A deck plate key with attitude! 19 tools in one, this new multi-key wants to go along on your next outdoor adventure! The Snap Tool Multi-Key is a...
View full details